:: PRODUCTS::

HDPE Pipes ::

PP Pipes ::

Double Wall Corrugated Duct (DWC Pipe) ::
Polypropylene Grating ::

HDPE / PP Sheets ::

PP Valves ::

HDPE / PP Spiral Tanks ::

HDPE / PP Lining for tanks ::

PP Coated - MS Insert Nut-Bolts & Studs ::
Welding Mirror, Hot Air Gun, Mechanical Jack ::
Acrylic Sheets, Rods, Tubes ::
Products ::---- Ball Valve :: Butterfly Valve :: Ball Check Valve :: Foot Valve :: Diaphragm Valve :: Sight Glass Valve
Ball Check Valve::      Feature      Diamension      Diagram     

Mahavir Agencies offers Ball Check valves with free floating ball, which is the only moving part, thus ensuring least maintenance. They are available with various elastomer seats like Neoprene, EPDM, Hyplon, Viton for compatibility with different chemicals. The solid
ISO-PP/PVDF ball shuts-off on elastomer seats giving no chance of leakage. The free floating ball is fully supported by guide ribs for full flow and minimum turbulence. The Ball Check valves are available in long and short pattern. These valves are recommended for pressure rating of PN 10 & every valve is hydro tested at 10 kg/cm². These valves are available with flange drilling as per BS Table 'D', 'E' or 'F' , ASA , DIN or any other standard

 :: Feature :::::::::::::::::::::::::::::::::..........
Free floating ball allows maximum flow through valve.
The only moving part is ball, so least maintenance.
The solid Isotactic PP / PVDF ball shuts,-ojf on elastomer seat gives no chance of leakage.
Ball fully supported by guid ribs for full flow & minimum turbulence.
Available with various elastomer seat like Neoprene Hipline, EPDM, Viton for Compitability with different chemicals.
Ball sealing at a minimum water column of 1 meter.
Also available with short pattern lengths.
Available with all type off lange drilling like B S., ASA-150, DIN or any other as required.
Each valve is hydro tested @ 10 kg / cm2 pressure.
Face to face length to DIN 3202 also available.

 :: Diamension :::::::::::::::::::::::::::::::::..........
TOLERANCE L&T DIMENSIONS ARE ± 2mm
No.
PARTS
QTY
MATERIAL
1
BODY
01
ISOTACTIC PP
2
FLANGE
02
ISOTACTIC PP
3
BALL
01
ISOTACTIC PP
4
BALL GUIDE RING
01
ISOTACTIC PP
5
'O' RING
02
EPCM
6
'O' RING
01
EPCM
7
STUD & NUT
06
M.S.
8
CAP
12
ISOTACTIC PP











SIZE
D1
D2
D3
T
L
d
Nos. of
HOLES
25
25.4
82.5
114.3
16.0
150
16
4
32
32.0
87.3
133.0
18.0
175
16
4
40
38.1
98.4
133.0
18.0
175
16
4
50
50.8
114.3
152.0
21.0
180
19
4
65
63.5
127.0
165.0
23.0
241
19
4
80
76.2
146.0
184.0
26.0
241
19
4
100
101.6
177.8
216.0
28.0
350
19
8
150
152.4
235.0
279.5
31.0
480
19
8
All dimensions are in mm    * PN = Pressure Rating Kg / cm2       ** Cv Value =Ø
*** CV Value = No. of u.s. gallons per minute of Water that will flow through valve with one psi pressure drop (1 U.S. gal. = 3.78 liters)

 :: Diagram :::::::::::::::::::::::::::::::::..........
 

 

[ Home | About Us | Products | Enquiry Form | Contact Us ]
© Mahavir Agencies. 5, Aashirwad Heavy Indl. Estate No. 5, Ram Mandir Road, Goregaon (W), Mumbai - 400 062, India
Tel: +91-22-2676 4495/6 E: mampw@hotmail.com
Site designed by www.mesotek.com