:: PRODUCTS::

HDPE Pipes ::

PP Pipes ::

Double Wall Corrugated Duct (DWC Pipe) ::
Polypropylene Grating ::

HDPE / PP Sheets ::

PP Valves ::

HDPE / PP Spiral Tanks ::

HDPE / PP Lining for tanks ::

PP Coated - MS Insert Nut-Bolts & Studs ::
Welding Mirror, Hot Air Gun, Mechanical Jack ::
Acrylic Sheets, Rods, Tubes ::
Products ::---- Ball Valve :: Butterfly Valve :: Ball Check Valve :: Foot Valve :: Diaphragm Valve :: Sight Glass Valve
Diaphragm Valve    Feature      Diamension      Diagram     

Diaphragm valves are having one piece rugged body with cross ribs at flanged ends. They are available in size range of 15mm to 100mm . It's latest inverted design diaphragm remains unstressed while valve is in closed position, thus giving more service life. The diaphragm of these valves are available with Neoprene, EPDM , Hyplon, Butyl, PTFE-Coated and pure PTFE. The ¬Diaphragm valves with deep seat allows maximum flow and excellent flow characteristics.

They are recommended for pressure rating of PN 10 & every valve is hydro tested at PN 10 for body & seat. These valves are available with flange drilling as per BS Table 'D', 'E' or 'F' , ASA , DIN or any other standard.
 :: Feature :::::::::::::::::::::::::::::::::..........
One piece rugged body with cross ribs at f/anged ends.
Latest inverted design diaphragm remains unstressed while valve is in closed position, gives more service life.
Deep seat allows maximum f/ow & excellent throttling characteristics.
Available with Neoprene, EPDM, Hyplon, Butyl, Tef/oncoted and pure tef/on diaphragms.
Flange drilling can be provided as per B.- S. table D, E or F, ANSI-ISO, DIN or any other standard.
Every valve is hydro tested @ 10 Kg / cm2 for body & seat.

 :: Diamension :::::::::::::::::::::::::::::::::..........
TOLERANCE L&T DIMENSIONS ARE ± 2mm
No.
PARTS
QTY
MATERIAL
1
BODY
01
ISOTACTIC PP
2
DIAPHRAGM
01
NEOPRENE
3
BONNET
01
ISOTACTIC PP
4
COMPRESSOR
01
ALUMINIUM/C.I.
5
BOLT,NUT, WASHER
04
M.S. ZINC PLATED
6
NUT
01
M.S.
7
WASHER
01
M.S.
8
STEM
01
M.S.
9
 PIN
02
 M.S.
10
 HAND WHEEL
01
 ISOTACTIC PP/C.I.

SIZE
D1
D2
D3
T
L
H
d
Nos. of
HOLES
15
12.7
66.7
95.0
15.0
101
82
16
4
20
19.0
73.0
101.6
15.0
117
110
16
4
25
25.4
82.5
114.3
16.0
126
120
16
4
32
32.0
87.3
133.0
17.0
158
158
16
4
40
38.1
98.4
133.0
17.0
158

158

16
4
50
50.8
114.3
152.0
21.0
190
177
19
4
All dimensions are in mm        * PN = Pressure Rating Kg / cm2         ** Cv Value =Ø
*** CV Value = No. of u.s. gallons per minute of Water that will flow through valve with
one psi pressure drop (1 U.S. gal. = 3.78 liters)
 :: Diagram :::::::::::::::::::::::::::::::::..........


 

[ Home | About Us | Products | Enquiry Form | Contact Us ]
© Mahavir Agencies. 5, Aashirwad Heavy Indl. Estate No. 5, Ram Mandir Road, Goregaon (W), Mumbai - 400 062, India
Tel: +91-22-2676 4495/6 E: mampw@hotmail.com
Site designed by www.mesotek.com